Stone Bonder

Stone Bonder

Perfect stone fabrication.


Stone Bonder is a super flexible, dripless/non-sag, low shrink, hard surfacing adhesive designed for the nearly seamless bonding of Natural Stone.

Stone Bonder is a two-part methacrylate, super flexible, dripless/non-sag, low shrink, low exotherm, ultra violet light stable, non-yellowing hard surfacing adhesive designed for the nearly seamless bonding of natural stone products.

Combined at a ratio of 10:1 (10 parts resin, one part activator), Stone Bonder has a working time of 10 to 15 minutes, with a 5 to 10 minute De-Roping Time, and achieves nearly 90 percent of its ultimate strength in 45 to 60 minutes at room temperature curing.

Stone Bonder offers a combination of high strength, stiffness, and toughness as well as the ability to bond very strongly to a wide variety of hard surface or inorganic materials.

Stone Bonder permits the seasoned fabricator the opportunity to apply the adhesive to vertical surfaces, as well as horizontal surfaces, without dripping, and upon gelation, gives the fabricator an extended window (5 to 10 minutes) to de-rope, or trim with a single bladed straight edge razor blade, the excess from the stone slab without ripping the adhesive out of the joint, nor damaging the surface of the stone.


PropertyResult
Working Time10-15 minutes
De-roping Time5-10 minutes
Fixture Time20-30 minutes
Routable Time45-60 minutes
Operating Temperature65°F – 85°F (18°C – 30°C)
Gap Filling0.250 inches — 5mm
Mixed Density8.6 lbs/gal (0.98 g/cm³)
Viscosity — Adhesive75,000 cps
Viscosity — Activator20,000 – 25,000 cps
Color — AdhesiveVarious
Color — ActivatorColorless / Translucent
Mix ratio10:1
Tensile Strength — Natural Stone2,500 – 3,000 PSI / Substrate Failure
Tensile Strength — Quartz3,000 – 3,500 PSI / Substrate Failure
Flash Point51°F (11°C) See SDS for more Information
Resistances toHydrocarbons, Acids and Bases, Vinegar, Wine and condiments, Most household foods
Susceptible toPolar solvents, Super strong acids and bases


Available in 250ml cartridges in the following colors:

CodeAdhesive Name
0050Butterscotch
3008Chameleon
0065Cocoa Brown
2195Cygnus Pearl
3077Earth
2220Flint
3006Glacier White
0110Khaki
3091Magic
0160Pewter
3078Rhin
3062Satin Black
3036Thunder Grey
0271Transparent White