Adhesive Calculator
Enter the total linear length for your fabrication below to get the total amount of adhesive needed. The estimated volume in this table is provided only as a basic guideline and is based on a seam that has a 0.020″ gap and a slightly irregular surface. A smooth cut and tight fit will require significantly less adhesive than a joint with a rough surface or uneven gap.
Deck seam
![](http://www.integra-adhesives.com/wp-content/uploads/2015/07/deckseam.png)
Laminated Edging
![](http://www.integra-adhesives.com/wp-content/uploads/2015/07/lamination.png)
Mitered Edging
![](http://www.integra-adhesives.com/wp-content/uploads/2015/07/miterjoin.png)