All rights reserved Integra Adhesives Inc. © 2007
Web Design by Axxent Design

Manufacturers of Innovative
Adhesive Products for Solid Surface, Engineered Stone and Composites

Our Products

Adhesives:

• Solid Surface Adhesive 13-E
• Engineered Stone 101/
  Quartz Surface
• Composite Adhesive RTP-01
• Rodding Compound 1A

Dispensers / Accessories:

• Dispenser Guns
• Mixing Tips
• Sink Fasteners

Packaging Options:

• Cartridge
• Bulk Containers

Documentation:

• Instructions / Tutorials
• Technical Data
• Material Safety Sheets
• Order Form
• Credit Application
• Credit Card Authorization
• UPS Order Tracking

Integra Adhesives Inc.

Toll Free Order Line:
Ph. 888.862.6665 (North America)
Ph. (1)-604.850.1321
Fx. (1)-604.850.1354
Contact Us

Tips and Techniques

Disturbing adhesive prior to cure

Disturbing the exposed adhesive at the joint line prior to the surface curing can cause the adhesive to remain sticky and under cured at the surface.
Let the adhesive cure undisturbed until the surface dulls and becomes hard. Do not handle the project until there is sufficient bond strength. A rough estimate for handling time (materials that are at room temperature when bonded) is 2 X working time. i.e. 15 minute to set up; allow 30 minutes before applying stress to the joint.

Back